MQ-1 Predator UAV

The Predator is an unmanned aerial vehicle (UAV) used primarily by the United States Air Force (USAF) and Central Intelligence Agency (CIA). This scale model has been carefully handcrafted from solid mahogany. Rich detailing and a high gloss finish reveal a deep wood grain. Stand included. 14” Long x 22” Wide x 9” High

Avro Arrow

Avro Arrow

---

The Avro Canada CF-105 Arrow was a delta-winged interceptor aircraft, designed and built by Avro Aircraft Limited in Malton, Ontario, Canada. Considered to be both an advanced technical and aerodynamic achievement for the Canadian aviation industry, the CF-105 held the promise of Mach 2 speeds at altitudes exceeding 50,000 ft. This scale model has been carefully handcrafted from solid mahogany. Rich detailing and a high gloss finish reveal a deep wood grain.  Stand included. 17” Long x 12” Wide x 9” High.

---

Boeing 777

This Boeing 777 scale model is handcrafted from solid mahogany. Careful
detailing and a high gloss finish reveal a rich wood grain.  Stand
included. 18” Long x 20” Wide x 10” High

Boeing 787

This Boeing 787 scale model is handcrafted from solid mahogany. Careful
detailing and a high gloss finish reveal a rich wood grain.  Stand
included. 18” Long x 20” Wide x 10” High

Van's Aircraft RV-6

The RV-6 was the first aircraft in the popular Van's RV series to feature side-by-side seating and the first to offer a nosewheel option. It was first flown in 1985. Over 2500 kits have been completed and flown. The RV-6 and RV-6A were replaced by the similar, but improved, RV-7 in 2001
17” Long x 19” Wide x 9” High

A-3 Skywarrier

The Douglas A-3 Skywarrior is a jet-powered strategic bomber that was developed and produced by the Douglas Aircraft Company. It was designed by Douglas on behalf of the United States Navy, which sought a carrier-capable strategic bomber. Handcrafted and finely detailed, this A-3 model is given multiple coats of polyurethane finish for a high gloss and rich wood grain. Dimensions 16"L, 16" WS, 8" H. Includes stand.

Bombardier CRJ 900

Bombardier CRJ 900

---

The Bombardier CRJ900, is a regional jet s that were designed and manufactured by Canadian transportation conglomerate Bombardier between 1999 and 2020. Their design was derived from the smaller CRJ100 and 200 airliners. Measures about 19" x 21" x 8". Includes stand.

---

F-19 Stealth Fighter

F-19 Stealth Fighter

---

F-19 is the designation for a hypothetical US fighter aircraft that has never been officially acknowledged, and has engendered much speculation that it might refer to a type of aircraft whose existence is still classified. Measures about 19" x 21" x 8". Includes stand.

---

MQ-9 Reaper UAV

This scale model has been carefully handcrafted from solid mahogany. Rich detailing and a high gloss finish reveal a deep wood grain. Stand included. 14” Long x 22” Wide x 9” High

The General Atomics MQ-9 Reaper (sometimes called Predator B) is an unmanned aerial vehicle (UAV, one component of an unmanned aircraft system (UAS)) capable of remotely controlled or autonomous flight operations, developed by General Atomics Aeronautical Systems (GA-ASI) primarily for the United States Air Force (USAF). The MQ-9 and other UAVs are referred to as Remotely Piloted Vehicles/Aircraft (RPV/RPA) by the USAF to indicate ground control by humans.

The MQ-9 is a larger, heavier, more capable aircraft than the earlier General Atomics MQ-1 Predator and can be controlled by the same ground systems. The Reaper has a 950-shaft-horsepower (712 kW) turboprop engine (compared to the Predator's 115 hp (86 kW) piston engine). The greater power allows the Reaper to carry 15 times more ordnance payload and cruise at about three times the speed of the MQ-1.

Plaque / Name Plate / Engraving

F-15 Eagle

F-15 Eagle

---

The F-15 Eagle is one of America's favorite modern fighter planes. Doing a vertical climb to cruise altitude in 15 seconds, this bird has phenomenal agility in flight. This scale model replica is handcrafted from solid mahogany. Extra details are hand carved for exceptional accuracy. Three coats of polyurethane finish add high gloss and a deep wood grain. Stand included. Length: 17", Wing Span: 11".

---

Cirrus 22

The Cirrus 22 remains a favorite aircraft among new and old aviation buffs alike, and this handcrafted scale model is made of solid mahogany and given great detail. It is finished in a high gloss polyurethane to reveal the rich wood grain. Stand included. 17” Long x 19” Wide x 9” High

F-35 Lightning II

This handcrafted model of the F-35 is a remarkable scale replica in solid mahogany. Movable props, hand carved details, and three coats of polyurethane finish add up to an outstanding gift or office accent with a high gloss finish and deep wood grain. 18” Long x 13” Wide x 7” High. Stand included, . Click on Larger Photo for alternate view.

P-38 Lightning

This collectable model P-38J Lightning represents one of the most innovative fighters of World War II, the twin-boom Lockheed P-38J Lightning. Designed by famed aeronautical engineer Kelly Johnson, the P-38 was also the aircraft flown by the top two U.S. aces in World War II. This 1/50-scale model P-38J Lightning makes a great pilot gift or a present for any veteran, aviation enthusiast or history buff.

C-5 Galaxy

This scale model of the C-5 cargo transport plane is beautifully handcrafted from solid mahogany it has fine detail and a high gloss finish for a rich wood grain. Stand included.

Boeing Stearman Kaydet

The Stearman (Boeing) Model 75 is a biplane used as a military trainer aircraft, of which at least 10,626 were built in the United States during the 1930s and 1940s.[1] Stearman Aircraft became a subsidiary of Boeing in 1934. Widely known as the Stearman, Boeing Stearman or Kaydet, it served as a primary trainer for the USAAF, the USN (as the NS & N2S), and with the RCAF as the Kaydet throughout World War II. After the conflict was over, thousands of surplus aircraft were sold on the civilian market. In the immediate postwar years they became popular as crop dusters, sports planes, and for aerobatic and wing walking use in airshows.

P-3 Orion

P-3 Orion

---

The Lockheed P-3 Orion is a four engine turboprop anti-submarine and maritime surveillance aircraft developed for the United States Navy and introduced in the 1960s. Premium Wood Designs P-3 Orion is made from Philippines Mahogany. The P-3 Orion has a wing span of 18.5 inches and a body length of 20" When placed on the detachable display stand, the P-3 Orion  has a maximum height of 9.25".  

---

U-2 Spy plane

All wood U-2 Spy plane.  The Lockheed U-2, nicknamed "Dragon Lady", is an American single-jet engine, ultra-high altitude reconnaissance aircraft operated by the United States Air Force (USAF) and previously flown by the Central Intelligence Agency (CIA). It provides day and night, high-altitude (70,000 feet; 21,000 m), all-weather intelligence gathering.

Cessna Bird Dog

The Cessna Bird Dog is beautifully recreated in this
handcrafted scale model. Made of solid mahogany and finely detailed, this
classic aircraft in a clear polyurethane high gloss finish has deep wood grain
and a gleaming finish.

C-141 Starlifter

C-141 Starlifter

---

A workhorse of the US Air Force, the C-141 troop transport is handcrafted from solid mahogany with rich detailing. A high gloss finish reveals the rich wood grain.  Stand included.  18” Long x 17” Wide x 8” High

---

Boeing 727

This Boeing 727 scale model is handcrafted from solid mahogany. Careful
detailing and a high gloss finish reveal a rich wood grain.  Stand
included. 18” Long x 20” Wide x 10” High

Van's Aircraft RV-8

The Van's RV-8 is a tandem two-seat, single-engine, low-wing homebuilt aircraft sold in kit form by Van's Aircraft. The RV-8 is equipped with conventional landing gear, while the RV-8A version features tricycle landing gear. Stand included. 17” Long x 19” Wide x 9” High

KC-46 Pegasus

The Boeing KC-46 Pegasus is a military aerial refueling and strategic military transport aircraft developed by Boeing from its 767 jet airliner. In February 2011, the tanker was selected by the United States Air Force (USAF) as the winner in the KC-X tanker competition to replace older Boeing KC-135 Stratotankers. The first aircraft was delivered to the Air Force in January 2019.[3] The Air Force intends to procure 179 Pegasus aircraft by 2027

Cessna T-210

The Cessna T-210 Centurion is a six-seat, high-performance, retractable-gear, single-engine, high-wing general aviation aircraft which was first flown in January 1957 and produced by Cessna until 1986. This model is a wonderful representation of the the Cessna T-210. Handcrafted of solid mahogany, this plane has movable props and wheels, three coats of polyurethane finish for high gloss, and rich wood grain.

Airbus A-380

The Airbus A380 is a wide-body aircraft manufactured by Airbus. It is the world's largest passenger airliner. The A-380 has been recreated in solid mahogany by expert artisans. This jet is finely detailed with a high gloss finish which reveals the rich wood grain. Stand included. 18” Long x 17” Wide x 8” High

King Air 200

Handcrafted and finely detailed, this King Air 200 is given multiple coats of polyurethane finish for a high gloss and rich wood grain. Dimensions 15.5"L, 18" WS, 7" H. Includes stand.

King Air 350

Handcrafted and finely detailed, this King Air 350 is given multiple coats of polyurethane finish for a high gloss and rich wood grain. Dimensions 15"L, 18" WS, 7" H. Includes stand.

Cessna 150

The Cessna 150 is a two-seat tricycle gear general aviation airplane that was designed for flight training, touring and personal use. In 1977 it was succeeded in production by the Cessna 152, a minor modification to the original design.Handcrafted and finely detailed, this Cessna 150 is given multiple coats of polyurethane finish for a high gloss and rich wood grain. Dimensions 14.5"L, 20" WS, 6" H. Includes stand.

EA-6B Prowler

The Northrop Grumman EA-6B Prowler is a twin-engine, four-seat, mid-wing electronic-warfare aircraft derived from the A-6 Intruder airframe. The EA-6A was the initial electronic warfare version of the A-6 used by the United States Marine Corps and United States Navy. High gloss polyurethane adds rich wood grain to this handcrafted scale model of the EA-6B Prowler. Hand carved details add to the authenticity of this remarkable replica, making it great gift or desktop accessory. Stand included. 16"L x 14"WS x 7"H.

Douglas DC-9

The McDonnell Douglas DC-9 is a single-aisle airliner designed by the Douglas Aircraft Company. Handcrafted and finely detailed, this DC-9 model is given multiple coats of polyurethane finish for a high gloss and rich wood grain. Dimensions 18"L, 14" WS, 6" H. Includes stand.